Crystal Clear Epoxy Resin Kit - 32 Oz
Guarantee Safe Checkout
- Universal clear epoxy resin and hardener: The versatile clear liquid epoxy is durable, odorless, and UV-resistant. The high gloss resin and hardener can be used for various purposes and it protects your artwork from yellowing, water, and mechanical damage.
- Bubbles-free: Mix the heat resistant epoxy with a 1:1 ratio and start to pour your product. Due to its low viscosity, the countertop epoxy has no bubbles and creates a beautiful, clean final layer.
- Various use cases: The clear epoxy resin for wood is ideal for all your coating and casting artwork. It can be used for jewelry making, river tables, acrylic pour paintings, resin art, filling countertops, any volumetric decorative pourings, creating colored panels, mosaics, etc.
- For professionals & beginners: Our craft resin epoxy resin kit contains a safe, odorless, clear epoxy for countertop, which is ready for use. It may be suitable for professionals and people taking their first steps in a new hobby.
- Carefully chosen: Our epoxy resin clear is premium quality, durable, and high gloss. We tested countertop epoxy kit from different factories and chose the best one for you and your artwork.
Crystal Clear Epoxy Resin Kit - 32 Oz
FAQs
How do I ensure that my resin cures properly without any bubbles?
7 Steps to a Bubble-Free and Flawless Cure
1. The temperature of the workspace, and resin itself, is key. The workspace should be between 72°-85°F, the closer to 78°, the better.
2. If the resin is cool, use a warm bucket of water and place the resin and hardener bottles into the warm water. This will prevent microbubbles. The working time* of the resin mixture will decrease from 45 minutes to 30 minutes. This is because the resin mixture is thermosetting, and with an increased temperature, the curing process will begin sooner than usual. (*Working time is the time you have to mix and pour the resin mixture once the hardener and resin meet in the same cup.)
3. When pouring either the resin or hardener, carefully pour down the side of the measuring cup. Pouring from high above the measuring cup can result in air bubbles.
4. Double check that the resin and hardener are exactly a 1:1 ratio of resin to hardener by volume.
5. When mixing, mix smoothly, thoroughly, and consistently to avoid adding air bubbles. (To avoid adding air to the mixture, press the stirring utensil to the bottom of the cup while mixing.)
6. After the resin and hardener is mixed and poured, wait about two minutes. Then, to remove any air bubbles, use an artist’s torch, kitchen torch, lighter, toothpick, or straw to remove bubbles. (Keep checking over the next 1-2 hours to make sure that additional bubbles do not appear.)
7. Last tip: If the resin and hardener are ever milky or cloudy, this is a good indicator that the temperature of your resin is too low.
1. The temperature of the workspace, and resin itself, is key. The workspace should be between 72°-85°F, the closer to 78°, the better.
2. If the resin is cool, use a warm bucket of water and place the resin and hardener bottles into the warm water. This will prevent microbubbles. The working time* of the resin mixture will decrease from 45 minutes to 30 minutes. This is because the resin mixture is thermosetting, and with an increased temperature, the curing process will begin sooner than usual. (*Working time is the time you have to mix and pour the resin mixture once the hardener and resin meet in the same cup.)
3. When pouring either the resin or hardener, carefully pour down the side of the measuring cup. Pouring from high above the measuring cup can result in air bubbles.
4. Double check that the resin and hardener are exactly a 1:1 ratio of resin to hardener by volume.
5. When mixing, mix smoothly, thoroughly, and consistently to avoid adding air bubbles. (To avoid adding air to the mixture, press the stirring utensil to the bottom of the cup while mixing.)
6. After the resin and hardener is mixed and poured, wait about two minutes. Then, to remove any air bubbles, use an artist’s torch, kitchen torch, lighter, toothpick, or straw to remove bubbles. (Keep checking over the next 1-2 hours to make sure that additional bubbles do not appear.)
7. Last tip: If the resin and hardener are ever milky or cloudy, this is a good indicator that the temperature of your resin is too low.
How do I know when Epoxy Resin is fully-mixed and ready to use?
The mixing process is tedious, but necessary. Mix consistently for 3-5 minutes. Mix thoroughly, until all streaks of resin have disappeared from the 1:1 resin and hardener mixture.
Should I wait before applying multiple layers or new coats?
We recommend a maximum thickness of 1/4” for each layer. If you need to pour several layers for additional thickness, wait for each layer to cure for 6 hours prior to pouring the next coat. Subsequent coats beyond 48 hours require light sanding with 220 grit sandpaper.
How much resin should I use for my creation?
When creating with Epoxy Resin, consider these calculations to better determine your measurements.
16 oz coats approximately 3 sq. feet @ 1/16” thick
32 oz coats approximately 6 sq. feet @ 1/16” thick
64 oz coats approximately 12 sq. feet @ 1/16” thick
1 gallon coats approximately 24 sq feet @ 1/16” thick
2 gallon coats approximately 48 sq. feet @ 1/16” thick
16 oz coats approximately 3 sq. feet @ 1/16” thick
32 oz coats approximately 6 sq. feet @ 1/16” thick
64 oz coats approximately 12 sq. feet @ 1/16” thick
1 gallon coats approximately 24 sq feet @ 1/16” thick
2 gallon coats approximately 48 sq. feet @ 1/16” thick
How long does Epoxy Resin take to cure?
Our epoxy resin will harden after 24 hours, but it is not fully cured until 72 hours. Be careful when demolding at 24 hours, because the cast can still be scratched.
How can I remove small imperfections from my Epoxy Resin piece?
Here are a few ways to fix imperfections in cured resin:
1. If the resin is sticky after curing: simply apply a second coating. Double-check the 1:1 ratio of hardener to resin and the temperature of your workspace.
2. If the resin is scratched after curing: wipe down and recoat.
3. If there is a jelly-like residue after curing: carefully scrape off the excess resin that has not cured with a plastic utensil. Then, apply a new layer of the resin and hardener mixture. Remember to mix at a 1:1 ratio and make sure that the temperature in the workspace is 72-85°F (the closer to 78°F the better). You may warm up the resin bottles in a warm water bath to ensure that there are no microbubbles.
4. If there are surface bubbles or debris after curing: sand with 80 grit sandpaper, wipe down, and recoat.
1. If the resin is sticky after curing: simply apply a second coating. Double-check the 1:1 ratio of hardener to resin and the temperature of your workspace.
2. If the resin is scratched after curing: wipe down and recoat.
3. If there is a jelly-like residue after curing: carefully scrape off the excess resin that has not cured with a plastic utensil. Then, apply a new layer of the resin and hardener mixture. Remember to mix at a 1:1 ratio and make sure that the temperature in the workspace is 72-85°F (the closer to 78°F the better). You may warm up the resin bottles in a warm water bath to ensure that there are no microbubbles.
4. If there are surface bubbles or debris after curing: sand with 80 grit sandpaper, wipe down, and recoat.
How do I demold my resin piece from a silicone mold?
Carefully pull the mold away from each of the sides of the piece before demolding. Pulling the mold off of the edges of the casted piece, first, prevents the silicone mold from sticking to the cast and tearing.
Will Epoxy Resin Coat my Counter Top?
Absolutely! We have had many customers create countertops and bar tops using our resin.
What do I do if my Epoxy Resin freezes?
Don’t worry, this is called crystallization and it won’t harm your Epoxy Resin. If your resin is frozen, simply move it into a warmer place and allow it to thaw, or place the bottles in a warm water bath.
What is the shore hardness of Clear Casting and Coating Epoxy Resin?
The shore hardness value of our epoxy resin after curing is 80-D.
What is the viscosity of Clear Casting and Coating Epoxy Resin?
The viscosity of our Clear Casting and Coating Epoxy Resin is 2500 cps which makes it great for doming, as well as coating and casting! Our epoxy resin formula is extremely versatile for many different artistic applications.
What is the heat tolerance of Epoxy Resin?
The heat deflection temperature of our resin is 105°F. Epoxy Resin is great for use as a coaster but is not recommended for hot coffee cups or for use as hot plates.
*Note: Heat deflection temperature is the temperature at which your epoxy will start to soften (you could dent with your fingernail) but will return to normal once cooled.
*Note: Heat deflection temperature is the temperature at which your epoxy will start to soften (you could dent with your fingernail) but will return to normal once cooled.
